Saturday, January 9, 2016

How to Make a Mug Caddy

I decided to give this little item the name of mug caddy for lack of a better term but it can also be used for tin cans, mason jars or some other such thing.

Here is the pic of the one I made as a sample for my Sewing Group.



And here is the pattern I used.As you can see, the dimensions are  approximately 10" X 10" but it tapers off at the top.


The only other piece is a long rectangle pocket piece which measures twice the width of the bottom of the above piece ( 2 X 10" so 20'' by about 6"".) and two strips of bias  tape or self made bias strips to coordinate with the body and pocket pieces.You should have enough to go around the body of the caddy and along the length of the long pocket strip.

Here are the pieces you need to cut out. I use flannelet between the two outer layers of the body of the caddy but you could use interfacing if you prefer.


Here are the steps.

1...Baste together the three layers of the body together. (Sorry no pic ).

2.Fold the long pocket strip in two lengthwise.




3. Sew the coordinating bias strip to the folded edge of the pocket strip.


4. Mark the midpoint of both the caddy body and the pocket strip and sew pocket at this juncture .


5. Sew each end of the pocket strip to the sides of the caddy and trim the corners.



6. Sew each half of pockets at their half way mark and then again until you have 8 sections .






7. Sew across the bottom to secure the sections to the caddy .Next the binding around the caddy and then across the top.


                                8. Press binding to wrong side and stitch in the ditch. Trim away extra fabric                                             close to stitching.


                                 9. Determine where best to add velcro closures and sew in place.



                                   10. Fit caddy to your choice of mug by folding upper half into the mug.
                                       


                                Fasten with velcro closures.


                                   For gift giving maybe you can add a sleep mask which should have a layer of                                        black out drapery lining in between the the two fabric layers because this will                                        make the mask much more effective in keeping out light.



                                 Here is another idea for this type of caddy. A friend gave me this one which has                                    been in my sewing room for years. It has a different design to fit over a tin                                            can with elastic at the bottom. It would need to be designed for a specific size of                                  holder but shouldn't be too hard to draft.






I hope this tutorial is clear and that you'll make one. It's quick to sew (1/2 hour ), and fun to match fun fabrics together and really useful for many things. I have one for make-up and make-up brushes that I find very useful.

Next up will be a short tutorial on how to make a hair towel
so more later from



3 comments:

  1. Such a great idea! I've got a Craft Gossip post scheduled for tomorrow evening that features your tutorial: http://sewing.craftgossip.com/?p=86160 --Anne

    ReplyDelete
  2. Great tutorial! I just linked up to your tutorial on my latest blog post!

    ReplyDelete
  3. Are your tutorials free to share? I am a newsletter editor for an ASG group and I would love to feature some of your tutorials (with credit of course and with your permission)

    ReplyDelete